Call Me Free Offline Send SMS

Aerial Insect Trap

Aerial Insect Trap
Aerial Insect Trap
Product Code : AC-199
Product Description

We run the organization by following all the code of ethics, which make us one of the reputed manufacturers and suppliers of Aerial Insect Trap. It is used to monitor the population of flying insects in field. Insects enter the trap by their own flight or by wind drift. The face of the funnel orients itself in the direction of wind and changes with the wind  direction. We manufacture this Aerial Insect Trap using best quality materials at our sound production unit. Also, we offer this trap at reasonable prices.


  • Supported by metal frame
  • Easy to clean
  • Breakage free

Aerial Insect Trap (Improved)(Ac-199)

*Aerial Insect Trap (Improved) Is Used To Monitor The Population Of Flying Insects In Field. The Insects Enter The Trap By Their Own Flight Or By Wind Drift.The Number Of Catches Is Really Influenced Of Wind Velocity. The Face Of The Funnel Orients Itself In The Direction Of Wind And Changes With The Wind  Direction.

Installation Of The Trap In The Field :

1. Insert The Ring Of The Hold Fast In The Upright.
2. Fix The Upright Firmly In Ground.
3. Fix The Prongs Of Hold Fast To The Ring.
4. Press The Hold Fast In The Ground And Tighten The Screw Of Hold-Fast Ring.
5. Tighten The Barrel In The Frame.
6. Fix The Metallic Loop In The Rear End The Barrel.
7. Put On The Net And Tie It With String.
8. Lubricated The Ball Bearing And Ensure That The Barrel Can Rotate Freely.
9.On Leaving The Barrel It Orient Itself Toward The Wind Direction.
10. After An Interval Of A Day Or Two, The Insects Are Collected. While Collecting Insects From The Net Loosen The Ring, And Remove The Net. Close The Mouth Quickly. Care Should Be Taken To Prevent Escape Of Insects From The Net.
11. Put On The Other Net.
12. Bring The Net In The Laboratory To Study The Insects.


Back to top